₨29,600 Original price was: ₨29,600.₨29,400Current price is: ₨29,400.

Solamo Energy
Surging grid electricity tariffs and frequent power outages across Karachi make installing a ultra high yield solar power system the most effective financial decision for commercial sites, industrial plants, and large residential properties. Generating maximum wattage from available rooftop or ground space is essential to drastically reduce monthly electricity expenses. Standard panels suffer efficiency losses during extreme summer temperatures and degrade over time. Upgrading to the Canadian Solar 710W N-Type TOPCon Bifacial Solar Panel provides global-grade photovoltaic engineering built for maximum daily energy yield, low heat losses, and long term system stability.
Manufactured by Canadian Solar, this 710-Watt module handles high ambient heat, airborne dust, and humid coastal air. It is an exceptional solution for large bungalows, commercial plazas, factory roofs, and industrial plants across Karachi.
Selecting massive 710W modules transforms how your solar energy plant operates throughout the day. Because each module generates 710 Watts on the front side alone, you require significantly fewer total panels to reach your target kilowatt capacity. This maximizes restricted roof space while lowering structural mounting frames, interconnecting copper wiring, DC distribution boxes, and installation labor costs.
Here are the primary reasons why the Canadian Solar 710W N-Type panel is an outstanding choice for local installations:
The Canadian Solar 710W panel achieves an impressive module efficiency rating of up to 22.9 percent. Converting more sunlight into usable electricity per square meter allows properties in dense industrial or commercial sectors like Korangi Industrial Area, SITE Industrial Zone, PECHS, and Saddar to produce more energy in less total footprint.
Featuring dual glass construction with high bifaciality, this panel captures direct sunlight on its front surface while harvesting reflected light from the back. When installed on light tiled roofs, white concrete surfaces, or elevated mounting structures, rear-side light absorption adds up to 10 to 25 percent additional power generation without taking up extra physical space.
Karachi summers routinely bring severe heatwaves, with temperatures crossing 40 degrees Celsius. Conventional panels suffer significant voltage drops under high ambient heat, reducing power generation right when heavy loads like air conditioners are running at peak capacity. The Canadian Solar 710W panel features a low temperature coefficient of -0.29 percent per degree Celsius. This allows your array to maintain higher electricity yield even during scorching summer afternoons.
Advanced N-Type silicon cell architecture prevents Light-Induced Degradation (LID) and Potential-Induced Degradation (PID). While older panel types drop power output rapidly over time, Canadian Solar guarantees less than 1 percent power loss in the first year and an annual degradation rate of no more than 0.4 percent for the next 29 years. This ensures steady, dependable electricity production for three full decades.
High humidity, salt mist, and strong monsoon winds test outdoor hardware in areas like DHA Phase 8, Clifton, and Scheme 33. Constructed with a heavy duty anodized aluminum frame and dual heat-strengthened glass, the Canadian Solar 710W module withstands front static loads up to 5400 Pa and rear wind pressure up to 2400 Pa.
Understanding the engineering inside Canadian Solar 710W panels explains why they deliver higher performance than older panel technologies:
Pure N-Type Silicon Wafer Base: Eliminates boron-oxygen defects, resulting in higher cell conversion efficiency, zero LID, and extended operational lifespan.
Tunnel Oxide Passivated Contact (TOPCon): Integrates an ultra-thin oxide layer that reduces surface electron recombination, allowing the cell to capture and convert extra sunlight into electricity.
Dual Glass Glass Structure: Replaces plastic backsheets with dual 2.0 mm tempered glass, offering higher fire safety, superior weather resistance, and maximum double-sided power production.
The Canadian Solar 710W module pairs easily with major commercial and residential hybrid or on-grid solar inverters widely used across Pakistan, including Deye, Sunsynk, Inverex Nitrox, Solis, Huawei, and Growatt. Its optimized voltage and current specifications allow installers to design longer panel strings per MPPT tracker, reducing cabling requirements and lowering overall balance of system costs.
Whether you are configuring a large 20kW residential installation or a 500kW commercial solar plant, choosing 710W modules reduces mounting frame requirements, wiring complexity, and labor hours on site.
| Feature | Technical Specification |
|---|---|
| Panel Model | Canadian Solar 710W N-Type TOPCon Bifacial (TOPBiHiKu7) |
| Maximum Power Output | 710 Watts |
| Cell Technology | N-Type Monocrystalline TOPCon (132 Dual Cell) |
| Module Efficiency | Up to 22.9% |
| Temperature Coefficient | -0.29% / °C |
| First Year Power Loss | ≤ 1.0% |
| Annual Power Degradation | ≤ 0.40% (Years 2 to 30) |
| Glass Construction | Dual 2.0mm Heat-Strengthened Glass |
| Frame Material | Anodized Aluminum Alloy |
| Warranty Package | 12 Year Product / 30 Year Power Output Warranty |
Canadian Solar 710W panels feature an ultra-low temperature coefficient (-0.29%/°C), meaning they lose far less power on hot summer days. Their dual glass design and anodized aluminum frame guard against coastal moisture, dust, and salty sea air.
Yes, Canadian Solar 710W panels work smoothly with commercial and high capacity hybrid or on-grid inverters available locally, including Deye, Inverex, Sunsynk, Solis, and Growatt.
Bifacial panels absorb reflected sunlight through their rear glass surface. On light colored roofs, tiles, or elevated mounting frames, rear side light capture adds up to 10 to 25 percent extra electricity yield.
Upgrade your property with high-yield solar technology. Contact our sales team today for current market pricing, technical layout assistance, stock verification, and quick delivery directly to your site anywhere in Karachi.
Solamo Energy designs and installs complete solar systems using the exact products in this shop, backed by after-sales support most installers don’t offer.
Our mission is to make solar energy accessible, affordable, and hassle-free for every home, business, farm, and factory in Karachi.
WhatsApp us